(0) Item Hello, Guest

Power Flow 1650 psi Power Steering Pump

Your Price: $589.95
Part Number:1-828

Choose Options

Pulley Choice
V-Belt Pulley
Serpentine (5-6) groove
No Pulley
85-95 Toyota 4Runner 79-95 Toyota Pickup
95-04 Toyota Tacoma with 2.7L I-4
95-04 Toyota Tacoma with 3.4L V6

Trail-Gear Power Flow™ 1650 psi Power Steering Pump for Hydro Ram Assist Steering

The Trail-Gear Power Flow™ 1650 psi Power Steering Pump has been designed and engineered to provide ultimate performance in hydraulic ram steering applications . It is a direct replacement for "TC" and "CB" style pumps.

The body of the pump is constructed of steel to increase reliability and decrease wear. It is equipped with heavy-duty hardened internals, large bushings and an oversized shaft making it ideal for high HP motors with greater radial loads.

The Power Flow™ Pump has one of the highest flow rates in the industry and maintains flow consistency across all RPMs. It will not bypass early.

Power Flow™ Variants

 

APPLICATIONSKUDESCRIPTION & APPLICATION NOTES

85-95 Toyota 4Runner
79-95 Toyota Pickup

130304-1-KIT

Includes:        
  • Power Flow™ 1650 psi Power Steering Pump
  • 4-7/8"" Black-anodized Aluminum V-Belt Pulley

 

95-04 Toyota Tacoma
with 2.7L I-4

300154-1-KIT

Includes:        
  • Power Flow™ 1650 psi Power Steering Pump
  • 4-3/4"" Black-anodized Aluminum 4-Rib Serpentine Pulley

 

95-04 Toyota Tacoma
with 3.4L V6

130612-KIT

Includes:        
  • Power Flow™ 1650 psi Power Steering Pump
  • 4-3/4"" Black-anodized Aluminum 4-Rib Serpentine Pulley

 

Universal
(No Pulley Included)

130303-KIT

This kit the Power Flow™ 1650 psi Power Steering Pump without a Pulley. Use the Power Flow™ Power Steering Pump Pulley Diameter Calculation PDF to calculate the pulley diameter for your custom application.




Power Flow™ Hydraulic Ram System - Related products (Sold Separately)

 

CATEGORYSKUDESCRIPTION & APPLICATION NOTES

Hydraulic Fluid Cooler

130516-1

If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing a oil cooler in front of the radiator is the best way to prevent this over heating. Our cooler features a fin area of 9" X 8" and does a great job of keeping the steering fluid temps under control in all conditions. Mounting kit is included with the oil cooler.

  • Fin area is 9" X 8"
  • Mounting kit is included with the oil cooler

Hydraulic Reservoir and Filter

130565-1-KIT

When you have invested thousands of dollars into your full hydraulic steering system, you will want to protect it with the best reservoir and filter that you can get. That is why Trail-Gear has developed our new Rock Assault™ Reservoir. It is not only heavy duty, but also compact and user friendly. It features a full size hydraulic oil filter that will keep all the bad stuff out of your power steering pump and hydraulic ram. Our Rock Assault™ Reservoir also comes with an internal baffle, features two internal magnets, and is completely sealed with top quality o-rings to prevent any fluid leakage. This reservoir also has a quick drain plug that is located at the bottom of the unit that will allow you to easily drain your system in minutes. Our unique fluid flow design is rated up to 15GPM and allows you to use your steering system while the truck is on its side or at other unusual angles that it might incur during rock crawling or desert racing.

Note: Do not fill more than 1/2" above the internal baffle.

Hydraulic Fluid Reservoir

130512-1

When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock reservoir is fine for the stock pump but is not adequate for the TC style aftermarket pumps. Side input of reservoir is a #6 JIC fitting and the bottom outlet to pump is a #10 JIC fitting. Reservoir includes cap.

Reservoir bracket makes it easy to bolt in the reservoir on most 4cyl 4X4 Toyota applications from 1979 - 1995. Includes mounting hardware. Unpainted finish.

  • Side input of reservoir is a #6 JIC fitting and the bottom outlet to pump is a #10 JIC fitting
  • Reservoir includes cap

Related Items

Logo